Skip to main content
TE Connectivity AMP Connectors 2-1658527-8

TE 2-1658527-8 34P IDC Receptacle, 0.100" Pitch, Gold

MPN 2-1658527-8
Active

TE Connectivity 622 series IDC receptacle, 34 positions, 2 rows, 0.100" (2.54mm) pitch, gold 30.0µin contact finish, 26-28 AWG ribbon cable, free-hanging, blue.

$6.3800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
Series622
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2-1658527-8 specifications
ParameterValue
Series622
Wire typeRibbon Cable
TypeFemale Socket
MountingFree Hanging (In-Line)
Connector typeReceptacle
Wire gauge26-28 AWG, Stranded or Solid
Cable terminationIDC
ColorBlue
Pitch0.100\" (2.54mm)
PackageBulk
FeaturesFeed Through, Polarizing Key, Strain Relief
Row spacing0.100\" (2.54mm)
Contact finishGold
Rows2
Positions34
Contact finish thickness30.0µin (0.76µm)

Product details

34-Position IDC Receptacle for 0.100" Ribbon Cable

The TE Connectivity 2-1658527-8 is a 34-position IDC receptacle from the 622 series, built for mass-terminating 0.100" (2.54mm) pitch ribbon cable. It accepts 26-28 AWG stranded or solid wire and terminates with a standard IDC press — no wire stripping, no individual crimp contacts. The dual-row layout mirrors the same 0.100" row spacing, so the whole cable lays flat into the slot and the press seats all 34 connections at once. That thickness puts it well into the field-service range — good for repeated mate/unmate cycles in equipment that gets opened for rework or reconfiguration. The housing is blue and includes a polarizing key, a feed-through design that lets the cable pass straight through, and an integral strain relief that grabs the cable jacket so a yank on the wire doesn't load the IDC slots. The polarizing key prevents a reversed or misaligned mate, which is the kind of mistake that kills an IDC termination on the first try.

Where It Goes and What It Handles

This connector lives inside equipment where a ribbon cable carries parallel signals between boards — think card-edge adapters, test fixtures, industrial controllers, or internal peripheral interconnects. The feed-through housing means the cable exits straight out the back, which keeps the routing clean in a shallow enclosure. The gold resists corrosion if the cabinet sees humidity or temperature swings.

Wire Prep and Termination

Termination is a one-shot IDC press: lay the 26-28 AWG ribbon cable across the slot, align the conductor centres with the 0.100" pitch, and press the cover down with a hand or arbor press. The slots pierce the insulation and grip the conductor — no solder, no crimp. Stranded or solid wire both work, though stranded needs a clean square cut across the ribbon to avoid stray strands shorting adjacent positions. The strain relief is built into the housing — it clamps the cable jacket behind the IDC slots. That matters because a ribbon cable's individual conductors are thin (26-28 AWG) and will pull out of the IDC slot if the jacket isn't anchored. Give it strain relief or it'll pull apart.

RoHS compliant per current directive — no lead, cadmium, or restricted phthalates in the housing or plating. That's the standard for new equipment shipped into EU or REACH-regulated markets.

MPN
2-1658527-8