Skip to main content
TE Connectivity AMP Connectors 2-2106431-4

TE 2-2106431-4 IDC Connector, 4 Pos, 0.157" Pitch, SMD RA

MPN 2-2106431-4
Active

TE Connectivity 2-2106431-4 IDC connector, 4 positions, 0.157" (4.00 mm) pitch, 1 row, 22 AWG, surface mount right angle, tin contacts, feed through, natural, ROHS3 compliant.

$1.4900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2-2106431-4 specifications
ParameterValue
MountingSurface Mount, Right Angle
Connector typeIndividual Wires
Wire gauge22 AWG
Cable pitch0.157\" (4.00mm)
Cable terminationIDC
ColorNatural
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesFeed Through
Contact finishTin
Rows1
Board-Side pitch0.157\" (4.00mm)
Positions4

Product details

4-Position Discrete-Wire IDC Connector for 22 AWG

The 2-2106431-4: It uses a 0.157" (4.00 mm) board-side pitch, which is wider than the 0.050" or 0.100" pitches common on ribbon IDC headers — this spacing gives each wire its own lane on the board and in the cable, making it a fit for point-to-point harnesses where you want to route each conductor separately rather than as a flat ribbon. The housing is natural (unpigmented) and carries a feed-through feature, meaning the IDC slot passes through the body so the wire can be inserted straight through — useful when you need to daisy-chain or continue the wire beyond the connector.

Pitch and Footprint — What 0.157" Means for Layout

At 0.157" (4.00 mm) pitch, this connector occupies more board real estate per circuit than a typical 0.100" ribbon IDC header, but the trade-off is that 22 AWG wire fits comfortably in the IDC slot without crowding. For a 4-position part, the total footprint is about 0.630" wide — compact enough for most control or sensor interface boards.

Termination and Assembly — IDC on Individual Wires

No stripping, no crimping — just a one-step press. The feed-through design means the wire can pass straight through the connector body, which simplifies daisy-chaining to a second connector or continuing the run to a termination point. The surface-mount right-angle orientation means the connector is reflow-soldered to the board first, then the wires are inserted after soldering — plan the assembly sequence accordingly.

MPN
2-2106431-4