Skip to main content
TE Connectivity AMP Connectors 2-2834075-2

TE SlimSeal 2-2834075-2, 2-Pos Receptacle Housing, IP67

MPN 2-2834075-2
Active

TE Connectivity SlimSeal receptacle housing, 2-2834075-2, 2 positions, 0.098" (2.50mm) pitch, Cable/Wire to Cable/Wire, IP67, 400V, 3.5A/5A, crimp termination, free hanging.

$0.7600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2-2834075-2 specifications
ParameterValue
SeriesSlimSeal
MountingFree Hanging (In-Line)
Connector typeReceptacle Housing for Pin Contact
Fastening typeLatch Holder
Voltage rating400V
Current rating3.5A, 5A
IP ratingIP67 - Dust Tight, Waterproof
Operating temperature-40°C ~ 105°C
Housing colorBlack
Housing materialPolybutylene Terephthalate (PBT)
Pitch0.098\" (2.50mm)
StyleCable/Wire to Cable/Wire
PackageTray
TerminationCrimp
Mating cycles30
Positions2

Product details

Sealed 2-Position Inline Splice Housing

The TE Connectivity SlimSeal 2-2834075-2 is a 2-position receptacle housing designed for cable-to-cable inline interconnects where moisture and dust are a concern. Rated for 400V and carrying a dual current rating of 3.5A and 5A — the variation depends on the wire gauge selected — this housing is suited for low-to-medium power feeds in outdoor lighting, sensor harnesses, or automotive auxiliary circuits.

This is a receptacle housing only — it ships without contacts. The housing accepts pin contacts (TE part family 2834075) and mates with the SlimSeal plug housing (the counterpart in the same series). The latch holder engages audibly when fully mated, and the IP67 seal compresses between the two halves. With only 30 mating cycles rated, this connector is best treated as a semi-permanent splice — install it and leave it. It's not meant for frequent disconnect/reconnect service like a test point or a battery harness that gets swapped regularly.

MPN
2-2834075-2