Skip to main content
TE Connectivity AMP Connectors 2-84984-5

2-84984-5 TE Connectivity FFC FPC Connector 25 Pos 1mm Pitch

MPN 2-84984-5
Active

TE Connectivity AMP 84984 series FFC/FPC vertical connector, 25 positions, 0.039" (1.00 mm) pitch, 1 A, tin-plated phosphor bronze contacts, through-hole kinked pin termination, white PBT housing.

$1.8400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSNot applicable
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2-84984-5 specifications
ParameterValue
MountingThrough Hole
Cable end typeStraight
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Vertical - 1 Sided
Voltage rating125V
Current rating1A
Operating temperature-20°C~85°C
Housing colorWhite
Contact materialPhosphor Bronze
Housing materialPolybutylene Terephthalate (PBT), Glass Filled
Height above board0.220\" (5.59mm)
Pitch0.039\" (1.00mm)
PackageTube
TerminationKinked Pin
Contact finishTin
FFC, FCB thickness0.30mm
Positions25

Product details

Sizing the Footprint and Contact Duty

The 2-84984-5: 25 positions on 1.00 mm pitch — the board footprint needs a trace channel every 0.039" for the full row. Rated 1 A per contact with tin plating. Tin is the economical choice for low-cycle mating: expect 20–30 insertions before the contact force degrades. For a cable that mates once during assembly and stays, tin is fine.

Vertical Orientation and FFC Fit

The vertical contact arrangement (contacts on one side) mates with a straight FFC or FPC — the cable enters perpendicular to the board. The 0.30 mm FFC thickness is the target; the contact beam is designed for that stack-up. Height above board is 0.220" (5.59 mm). This sets the z-height budget in the enclosure — enough clearance for the cable bend radius after the connector.

MPN
2-84984-5