Skip to main content
TE Connectivity AMP Connectors 2007779-1

TE Impact 2007779-1 Header, 90 Pos, 1.91mm Pitch

MPN 2007779-1
Active

TE Connectivity Impact series header, male pins, 90 positions, 9 rows, 0.075" (1.91mm) pitch, press-fit termination, through hole, gold 30.0µin contact finish, 30VAC/DC, 0.75A, UL94 V-0, black housing.

$12.4700 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesImpact
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2007779-1 specifications
ParameterValue
SeriesImpact
MountingThrough Hole
Connector typeImpact, Guide Left
Voltage rating30VAC/DC
Current rating0.75A
Operating temperature-55°C ~ 85°C
ColorBlack
Material flammability ratingUL94 V-0
Pitch0.075\" (1.91mm)
PackageBulk
TerminationPress-Fit
Contact finishGold
Rows9
Number of columns10
Positions90
Contact finish thickness30.0µin (0.76µm)

Product details

90-Position Impact Backplane Header with Guide Left Keying

The TE Connectivity 2007779-1 is a 90-position header from the Impact series, configured as a male-pin, right-angle press-fit connector with Guide Left keying. The 9-row, 10-column grid at 0.075" (1.91mm) pitch delivers a dense signal footprint for backplane and midplane applications.

Signal-Level Ratings Define the Duty

Rated 0.75A per contact at 30VAC/DC, this header is designed for signal-density routing, not power distribution. The 30VAC/DC rating reflects the tight 1.91mm pitch — creepage distance between adjacent pins is the limiting factor, not the contact itself. For a backplane carrying differential pairs or single-ended logic, the current headroom is adequate; for a power rail, a different connector family would be needed.

Press-Fit Termination for Solderless Assembly

The press-fit termination means the header is inserted into a PCB with plated through-holes using a pneumatic or hydraulic press — no wave soldering, no hand-solder touch-up. The compliant pin design provides a gas-tight interference fit that meets the reliability requirements of telecom and data-center backplanes. The through-hole mounting anchors the connector against the insertion and extraction forces of repeated daughtercard mating cycles.

The connector is RoHS Compliant.

MPN
2007779-1