Skip to main content
TE Connectivity AMP Connectors 2106431-4

TE 2106431-4 IDC Connector, 4 Pos 18 AWG SMD RA

MPN 2106431-4
Active

TE 2106431-4, wire IDC connector, 4 positions, 18 AWG, 4.00 mm pitch, surface mount right angle, tin contacts, natural housing.

$0.9225 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2106431-4 specifications
ParameterValue
MountingSurface Mount, Right Angle
Connector typeIndividual Wires
Wire gauge18 AWG
Cable pitch0.157\" (4.00mm)
Cable terminationIDC
ColorNatural
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesFeed Through
Contact finishTin
Rows1
Board-Side pitch0.157\" (4.00mm)
Positions4

Product details

4-Position IDC for 18 AWG — SMT Right-Angle Termination

The TE 2106431-4 is a 4-position wire-to-board IDC connector for 18 AWG discrete wires, terminated to the cable via insulation displacement and soldered to the board through a surface-mount, right-angle footprint. It belongs to the 2106431 base series, sharing the 4.00 mm cable and board-side pitch that keeps the wire spacing aligned with the PCB land pattern — no pitch mismatch between the cable exit and the solder pads. The natural housing carries a feed-through feature that lets a daisy-chain wire pass through the connector body without terminating at this position, useful for distributing a common signal or power rail across multiple connectors in a harness.

Termination and Harness Assembly

IDC termination on 18 AWG wire requires a proper press tool that drives the insulation-displacing slot through the jacket and onto the conductor — no wire stripping or crimping. The feed-through feature lets the installer pass a continuous wire through the connector body; the IDC slot only contacts the wire at the position where the terminal is pressed, leaving the rest of the wire uninterrupted for the next connector in the chain. Single-row, 4-position layout keeps the termination force per wire manageable with a hand tool, though a pneumatic or bench press is recommended for consistent slot penetration across all four positions.

MPN
2106431-4