Skip to main content
TE Connectivity AMP Connectors 5221123-2

TE Connectivity 5221123-2 BNC Jack, Through Hole, 50 Ohm

MPN 5221123-2
Active

TE Connectivity BNC series, 5221123-2, Jack Female Socket, 50 Ohm, 4 GHz, 500 V, Through Hole, Solder Termination, Bayonet Lock, 1 Port, Bulk.

$5.7600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5221123-2 specifications
ParameterValue
MountingThrough Hole
Connector typeJack, Female Socket
Fastening typeBayonet Lock
Voltage rating500 V
Frequency - max4 GHz
Operating temperature-55°C~85°C
Body materialZinc
Housing colorSilver
Dielectric materialPolyester
Center contact materialPhosphor Bronze
PackageBulk
Impedance50Ohm
Body finishTin
Mating cycles500
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

It uses a bayonet lock for quick, positive mating — the standard BNC coupling that gives a half-turn engagement and disengagement without tools. This is a single-port, 50 Ohm nominal impedance connector rated to 4 GHz, which puts it in the general-purpose RF interconnect class: suitable for test equipment, instrumentation, telecom infrastructure, and video distribution where the signal path stays below the 4 GHz ceiling. The 500 V rating is notably higher than many BNCs, so it can handle RF power or high-voltage test signals without derating concerns at the interface.

The 4 GHz max frequency covers the common bands for cellular (up to 2.7 GHz), Wi-Fi (2.4 GHz), GPS (1.575 GHz), and broadcast video — but it stops short of 5G mmWave or 6 GHz Wi-Fi 6E bands, so check the signal edge rates. The through-hole mount gives a stronger mechanical anchor than SMT for a coaxial connector that sees cable strain, and the zinc body with tin finish provides the RF shield path through the solder termination to the ground plane.

MPN
5221123-2