Skip to main content
TE Connectivity AMP Connectors 5413969-2

TE Connectivity 5413969-2 BNC Jack, 50 Ohm, 4 GHz

MPN 5413969-2
Active

TE Connectivity BNC jack, female socket, 50 Ohm, 4 GHz, 500 V, through-hole solder termination, bayonet lock, 1 port, bulk pack.

$5.7600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5413969-2 specifications
ParameterValue
MountingThrough Hole
Connector typeJack, Female Socket
Fastening typeBayonet Lock
Voltage rating500 V
Frequency - max4 GHz
Operating temperature-55°C~85°C
Body materialZinc
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBulk
Impedance50Ohm
Body finishTin
Mating cycles500
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

The 5413969-2: It's a 50 Ohm nominal impedance connector rated to 4 GHz, built around a PTFE dielectric and a beryllium copper centre contact plated in gold. This is a single-port jack suited for RF signal paths in test equipment, broadcast video routers, instrumentation, and industrial RF links where a reliable, field-serviceable coaxial interconnect is needed.

The 4 GHz upper frequency limit covers L-band, S-band, and the lower C-band, making it usable for cellular base station backhaul, GPS antenna feeds, and laboratory signal generators operating up to that ceiling.

Mechanical Durability and Mating Life

The bayonet coupling gives a positive lock — a quarter-turn engages the pin-and-slot, which is faster than a threaded SMA and more secure than a push-pull for vibration environments inside an equipment rack.

The shield solder posts tie directly to the PCB ground plane, which is essential for keeping the shield path low-inductance at 4 GHz. The zinc body with tin finish is a cost-effective choice for indoor equipment; if the application sees outdoor or corrosive environments, the tin finish is adequate inside a sealed enclosure but not rated for direct washdown.

MPN
5413969-2