Skip to main content
TE Connectivity AMP Connectors 5414168-3

TE Connectivity 5414168-3 TNC Jack, 50 Ohm, 11 GHz, Bulkhead

MPN 5414168-3
Active

TE Connectivity TNC jack, 50 Ohm, 11 GHz, panel mount bulkhead, crimp termination, RG-174/188/316, kit includes 6 pcs.

$6.6800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5414168-3 key specifications
ParameterValue
MountingPanel Mount
Connector typeJack, Female Socket
Fastening typeThreaded
Voltage rating500 V
Frequency - max11 GHz
Mounting featureBulkhead - Front Side Nut
Cable groupRG-174, 188, 316
Operating temperature-65°C ~ 165°C
Body materialZinc
Housing colorSilver
Dielectric materialPolymethylpentene (PMP)
Center contact materialBeryllium Copper

All specifications

5414168-3 additional specifications
ParameterValue
PackageBulk
Includes6 pcs - 1 Connector, 1 Contact, 1 Ferrule, 1 Gasket, 1 Lockwasher, 1 Nut
Impedance50 Ohms
Body finishNickel
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationCrimp
Center contact platingGold

Product details

The TE Connectivity 5414168-3 is a TNC jack, female socket, built for 50 Ohm systems and rated to 11 GHz. It comes as a bulkhead-mount kit — panel-mount with a front-side nut — and includes all six pieces needed for one install: the connector body, a crimp contact, a ferrule, a gasket, a lockwasher, and a nut. The zinc body gets a nickel finish, the beryllium copper centre contact is gold-plated, and the dielectric is polymethylpentene (PMP). This is the kind of RF interconnect you spec for a fixed station antenna feed or a test point where you want threaded reliability and a clean 50 Ohm match through 11 GHz.

This jack accepts RG-174, RG-188, and RG-316 coax — three common small-diameter cables for RF up through low microwave bands. The kit format means you do not have to hunt down the right ferrule or gasket separately; the bag has one of each per connector. If you are building a harness for RG-316, this is a straight match — no adapter ring or alternative ferrule needed.

The 11 GHz ceiling is the practical limit; above that, the TNC interface geometry starts to degrade the return loss. For a 2.4 GHz or 5.8 GHz Wi-Fi backhaul, or a GPS antenna feed at 1.5 GHz, this connector has headroom to spare. The 500-cycle mating life is solid for a threaded RF connector — the gold-on-beryllium-copper centre contact handles the wear, and the nickel body finish resists corrosion in outdoor or industrial cabinets.

MPN
5414168-3