Skip to main content
TE Connectivity AMP Connectors 5749111-1

TE Connectivity 5749111-1, AMPLIMITE .050 III D-Sub Plug

MPN 5749111-1
Active

TE Connectivity AMPLIMITE.050 III D-Sub plug, 20 positions, 2 rows, 0.050-inch pitch, IDC ribbon cable termination, 1 A, 30 V, gold-plated phosphor bronze contacts, shielded steel shell, UL94 V-0.

$11.1300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesAMPLIMITE .050 III
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5749111-1 key specifications
ParameterValue
SeriesAMPLIMITE .050 III
TypeSignal
MountingFree Hanging (In-Line)
Connector typePlug, Male Pins
Voltage rating30V
Current rating1A
Shell size, connector layout0.050 Pitch x 0.100 Row to Row
Operating temperature-55°C ~ 105°C
ColorBlack
Contact materialPhosphor Bronze
Dielectric materialThermoplastic
Shell material, finishSteel, Tin-Nickel Plated

All specifications

5749111-1 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
PackageTube
FeaturesShielded
TerminationIDC, Ribbon Cable
Contact finishGold
Rows2
Positions20

Product details

20-Position Shielded D-Sub Plug for Ribbon Cable

This is the male pin half of a D-sub pair, intended for free-hanging (in-line) cable assemblies where a shielded, low-profile interconnect is needed. The 0.050-inch pitch and 0.100-inch row-to-row spacing define the AMPLIMITE.050 III footprint — finer than the standard 0.108-inch D-sub pitch, which means it mates only with its matching AMPLIMITE.050 III receptacle, not with standard-density D-subs. Key characteristics include a shielded steel shell with tin-nickel plating for EMI suppression, gold-plated phosphor bronze signal contacts rated at 1 A per circuit at 30 V, and a UL94 V-0 thermoplastic housing.

What the 0.050-Inch Pitch and 1 A Rating Mean for the Fit

The 0.050-inch pitch is the defining dimension of the AMPLIMITE.050 III series — it is half the pitch of a standard D-sub (0.108-inch), so the 20 positions fit in a shell roughly the size of a standard 9-position D-sub. The IDC termination is a production-speed advantage — the ribbon cable is pressed onto the contacts in one operation, no individual wire stripping or crimping. The trade-off is that field repair means replacing the entire plug, not a single contact. For harness builders, this plug is the correct choice when the cable assembly is built in volume and the cable is a standard 20-conductor ribbon.

MPN
5749111-1