Skip to main content
TE Connectivity AMP Connectors 66107-4

TE Connectivity 66107-4 Multimate III+ Stamped Pin Contact

MPN 66107-4
Active

TE Connectivity Multimate III+ series, 66107-4 stamped pin contact, 24-26 AWG, gold 30.0µin (0.76µm) plating, brass, crimp termination, bulk.

$1.1200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

66107-4 specifications
ParameterValue
TypeStamped
SeriesMultimate III+
Wire gauge24-26 AWG
Contact materialBrass
PackageBulk
Pin or socketPin
Contact finishGold
Contact terminationCrimp
Contact finish thickness30.0µin (0.76µm)

Product details

It mates into any standard Multimate III+ cavity, which means it fits the same housings used across TE's industrial and commercial connector families.

The 24-26 AWG range is a tight signal-wire band — common for control circuits, sensor leads, and low-current power lines. Match the wire gauge to the terminal before crimping; the brass base material gives good crimp ductility without work-hardening during the crimp cycle.

Against the 66107-2, the difference is the gold plating thickness: the 66107-4 carries 30.0µin (0.76µm) gold, while the 66107-2 is listed with a different finish grade. For a harness that sees frequent disconnect-reconnect cycles in a corrosive or humid environment, the thicker gold on the 66107-4 is the better choice. The 66107-1 shares the same 24-26 AWG range and stamped construction but differs in plating specification — confirm the finish requirement against your application before substituting.

MPN
66107-4