HARTING 09670008476 — Machined Crimp Socket for D-Sub Connectors
The HARTING 09670008476 is a machined crimp socket contact designed for use in D-subminiature connector housings. It accepts 20-24 AWG wire and is terminated by crimping, then inserted into the appropriate D-sub insulator. The gold contact finish provides reliable electrical performance over repeated mating cycles, making it suitable for field-serviceable or legacy harness assemblies where the contact may be replaced individually.
This socket contact accepts 20-24 AWG stranded wire. The machined construction gives a consistent barrel for the crimp tool to deform around the conductor, producing a gas-tight connection. Use the HARTING crimp tool specified for this contact series to achieve the correct crimp height and pull-off force.
Mating Compatibility and Cross-Reference
The 09670008476 is a socket contact; it mates with a pin contact of the same series, such as the 09670008576 (also machined, 20-24 AWG, gold finish). For applications requiring a smaller wire gauge, the 09670005576 accepts 22-26 AWG but is also a pin contact. If a lower-cost stamped socket is acceptable, the 09670008278 (20-24 AWG, gold, brass material) is a stamped alternative — but the machined contact of the 09670008476 offers a more robust barrel for repeated crimp-and-insert cycles in field service.