0.35mm Pitch, 0.6mm Stack — Tight Mezzanine Fit
The Hirose BK13C06-10DP/2-0.35V(895) is a 10-position plug with outer shroud contacts from the BK13C series, designed for board-to-board mezzanine stacking at a mated height of 0.6mm. The 0.014" (0.35mm) pitch and dual-row layout pack the 10 circuits into a compact footprint, while the 0.019" (0.48mm) height above board keeps the profile low for tight enclosures.
What That Stack Height Means for Board Spacing
The solder retention feature on the SMT tails helps keep the connector anchored during reflow and resists shear from any cable strain on the mating half.
Gold Plating — Thin, but Matched to the Duty
That's a flash plating — enough for reliable signal-level mating in a low-cycle, once-and-done assembly environment like a consumer device. It won't handle thousands of mating cycles, but for a set-and-forget mezzanine connection it's the right call. The thin gold keeps cost down without risking corrosion in a controlled indoor environment.
BK13C06-10DP/2-0.35V(895) vs BK13C06-10DP/2-0.35V(800)
The (895) and (800) suffix variants are electrically and mechanically identical — same 0.35mm pitch, same 10 positions, same 0.48mm height above board, same gold plating. The only difference is packaging: the (895) comes in Tape & Reel and Cut Tape, while the (800) adds Digi-Reel® as an option. If your pick-and-place line runs from a reel, either works; the (895) is the standard reel option.
No obsolescence notice or last-time-buy is on record.