Skip to main content
Log in
Hirose Electric Co Ltd DF11-30DEP-2C — Connector Housings

Hirose DF11-30DEP-2C Plug Housing, 30 Pos, 2.00mm

MPNDF11-30DEP-2C
Active

Hirose DF11 series plug housing, DF11-30DEP-2C, 30 positions, 2.00mm pitch, dual row, panel mount snap-in, crimp termination, black polyamide, contacts not included.

$0.6100Ref. price · indicative, final on quote
Hirose Electric Co Ltd DF11-30DEP-2C datasheet (PDF)
RoHSROHS3 Compliant
SeriesDF11
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DF11-30DEP-2C specifications
ParameterValue
SeriesDF11
TypeMale Pin
MountingPanel Mount, Snap-In
Connector typePlug
Operating temperature-30°C ~ 85°C
ColorBlack
Insulation materialPolyamide (PA), Nylon
NoteContacts Not Included
Pitch0.079\" (2.00mm)
PackageBulk
Row spacing0.079\" (2.00mm)
Rows2
Contact terminationCrimp
Positions30

Product details

The Hirose DF11-30DEP-2C is a 30-position, dual-row plug housing from the DF11 series, on a 2.00 mm pitch. It is a panel-mount, snap-in style housing that accepts male pin crimp terminals — it does not include contacts, so the BOM line needs a separate terminal order code for each circuit.

The panel-mount difference

Unlike a standard DF11 wire-to-board plug that latches onto a PCB header, this housing (the DEP suffix) uses a snap-in panel mount. It locks into a rectangular panel cutout, making it the right choice when the cable assembly needs to pass through a bulkhead or enclosure wall and terminate on the other side.

Frequently asked questions

Are contacts included with DF11-30DEP-2C?

No. The DF11-30DEP-2C is a housing only — contacts are not included. You need to order the matching DF11 series male pin crimp terminals separately, one per circuit.

What is the difference between DF11-30DEP-2C and DF11-30DS-2C?

The DF11-30DEP-2C is a panel-mount snap-in plug housing, while the DF11-30DS-2C is a standard wire-to-board plug housing without the panel-mount feature. The DEP variant locks into a panel cutout; the DS variant mates directly to a PCB header without panel retention.