Skip to main content
Log in
Hirose Electric Co Ltd DF12E(3.0)-80DP-0.5V(81) — Board-to-Board Connectors

DF12E(3.0)-80DP-0.5V(81) Obsolete – Hirose DF12 80-Pin

MPNDF12E(3.0)-80DP-0.5V(81)
Obsolete

Hirose DF12 series, 0.020" (0.50 mm) pitch, 80 positions, 2 rows, header with outer shroud contacts, surface mount, gold plating 8.00 µin, 3 mm mated stack height, tape and reel packaging.

$2.2114Ref. price · indicative, final on quote
Hirose Electric Co Ltd DF12E(3.0)-80DP-0.5V(81) datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

DF12E(3.0)-80DP-0.5V(81) specifications
ParameterValue
SeriesDF12
MountingSurface Mount
Connector typeHeader, Outer Shroud Contacts
Height above board0.091\" (2.30mm)
Mated stacking heights3mm
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR)
Contact finishGold
Rows2
Positions80
Contact finish thickness8.00µin (0.203µm)

Product details

The DF12E(3.0)-80DP-0.5V(81): This is a Hirose DF12 series header with outer shroud contacts, 80 positions in two rows at 0.020" (0.50 mm) pitch. The mated stack height is 3 mm, which sets the board-to-board gap in a mezzanine configuration.

Obsolete – plan a replacement now

For a BOM line that still needs this footprint, the closest active sibling in the DF12 series is the DF12(3.0)-80DP-0.5V(81) — same pitch, same 80 positions, same 3 mm stack height, same outer shroud header format. Confirm the contact finish thickness and any mechanical tolerance differences against your current assembly drawing before swapping.

Sourcing the DF12E(3.0)-80DP-0.5V(81)

Because this part is obsolete, it is not held on the shelf. No stock-holding claim; sourced from our multi-supplier network.

Frequently asked questions

Is DF12E(3.0)-80DP-0.5V(81) obsolete?

Yes, the product status is Obsolete. The closest active sibling is the DF12(3.0)-80DP-0.5V(81) — same pitch, same 80 positions, same 3 mm stack height, same outer shroud header type. Verify the contact finish thickness and any mechanical tolerance differences before substituting.

What is the mating connector for DF12E(3.0)-80DP-0.5V(81)?

This header mates with a DF12 series receptacle of the same pitch (0.50 mm) and position count (80). The mated stack height is 3 mm, so the receptacle must be specified for that same stack height. Confirm the receptacle order code against the Hirose DF12 series product drawing.

Where can I buy DF12E(3.0)-80DP-0.5V(81)?

This obsolete part is not stocked. Submit an RFQ through the site to initiate a sourcing check.