Skip to main content
Log in
Hirose Electric Co Ltd DF12(3.0)-50DS-0.5V(80) — Board-to-Board Connectors

Hirose DF12(3.0)-50DS-0.5V(80), 50-Pos 0.50mm Receptacle

MPNDF12(3.0)-50DS-0.5V(80)
Obsolete

Hirose DF12 series, 0.020" (0.50mm) pitch receptacle, 50 positions, 2 rows, 3mm mated stacking height, surface mount, gold-plated center strip contacts, board guide and solder retention features.

$1.5500Ref. price · indicative, final on quote
Hirose Electric Co Ltd DF12(3.0)-50DS-0.5V(80) datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

DF12(3.0)-50DS-0.5V(80) specifications
ParameterValue
SeriesDF12
MountingSurface Mount
Connector typeReceptacle, Center Strip Contacts
Height above board0.087\" (2.20mm)
Mated stacking heights3mm
Pitch0.020\" (0.50mm)
PackageTube
FeaturesBoard Guide, Solder Retention
Contact finishGold
Rows2
Positions50

Product details

Board-to-Board Stacking Fit at 0.50mm Pitch

The Hirose DF12(3.0)-50DS-0.5V(80) is a 50-position receptacle from the DF12 series, built for parallel board stacking at a fixed 3mm mated height.

Obsolete — Sourcing This Part Now

The DF12(3.0)-50DS-0.5V(80) is listed as obsolete. No official replacement suffix is recorded, so any cross-reference must be verified against the board footprint and stack height. If your design is still in development, the active DF12(3.0)-50DS-0.5V(70) variant shares the same 50-position, 0.50mm pitch, and 3mm stack height — confirm the (70) suffix datasheet matches your assembly before swapping the BOM line.

What the 3mm Stack Height and 0.50mm Pitch Mean for Your Layout

That 3mm is tight — no room for tall components on the inner faces. The 0.50mm pitch forces a fine-line PCB trace and via pattern; standard 0.50mm pitch DF12 footprints use staggered via pads to route out the inner rows.

Frequently asked questions

Where can I buy DF12(3.0)-50DS-0.5V(80) available via RFQ confirmation?

Submit an RFQ for your target quantity and we'll locate stock from our supply network.

Is DF12(3.0)-50DS-0.5V(80) obsolete and what is the replacement?

Yes, this part is obsolete. The DF12(3.0)-50DS-0.5V(70) is a same-series variant with the same 50 positions, 0.50mm pitch, and 3mm stack height — verify the (70) suffix datasheet for footprint and electrical compatibility before substituting.

What is the mated stacking height of DF12(3.0)-50DS-0.5V(80)?

The mated stacking height is 3mm, measured from the top of the receptacle board to the top of the mating header board when fully engaged.