60-Position Mezzanine Header at 0.50 mm Pitch
The Hirose DF12(4.0)-60DP-0.5V(86) is a 60-position header from the DF12 series, designed for board-to-board mezzanine stacking. The connector is surface-mount and includes an integrated board guide for alignment during assembly and solder retention features to hold it in place through reflow.
4 mm Stack Height for Tight Board Spacing
At 0.50 mm pitch, the routing channels between pads are narrow — expect to use micro-vias or fine trace widths on inner layers to escape the BGA-like footprint. The 0.130" (3.30mm) height above the board means the header stands off the PCB by that dimension before mating.