20-Position Housing for 1.00mm Pitch Harnesses
The Hirose DF19-20S-1C is a 20-position plug housing from the DF19 series, built for 1.00 mm pitch wire-to-board interconnects.
Crimp Termination and Contact Note
The housing uses crimp termination — each female socket contact is crimped onto the wire separately, then inserted into the cavity. The note on this listing is direct: Contacts Not Included.
Position Count vs the 8-Position Sibling
The DF19-20S-1C carries 20 positions against the 8 positions of the DF19-8S-1C at the same 1.00 mm pitch and single-row layout. Both are active, beige, crimp housings with the same free-hanging mount. The 20-position version suits a higher circuit-count harness where the 8-position would leave unused cavities or require a second connector. If the BOM calls for 20 signal lines, this is the direct fit — no daisy-chaining two smaller housings.
Active Lifecycle and Sourcing
No official second-source cross-reference exists beyond the Hirose DF19 series itself.