Hirose DF22-3P-7.92DS(05) Header, 3-Pos, 7.92mm, 25A, 1000V
MPNDF22-3P-7.92DS(05)
Obsolete
Hirose EnerBee DF22 board-to-cable header, 3 positions, 7.92 mm pitch, right-angle through-hole, tin-copper mating finish (1.00 µm), 25 A per circuit at 1000 V, latch-holder fastening, 4-wall shroud, UL94 V-0 polyamide insulator, -35°C to 85°C operating range.
$0.4500Ref. price · indicative, final on quote
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Series | EnerBee™ DF22 |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Latch Holder |
| Voltage rating | 1000V |
| Current rating | 25A |
| Operating temperature | -35°C ~ 85°C |
| Contact material | Copper Alloy |
| Insulation color | Beige |
| Insulation height | 0.480\" (12.20mm) |
| Insulation material | Polyamide (PA), Nylon |
All specifications
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Features | Board Guide |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.312\" (7.92mm) |
| Positions | 3 |
| Contact finish - post | Tin |
| Contact length - post | 0.146\" (3.70mm) |
| Contact finish - mating | Tin-Copper |
| Contact length - mating | 0.354\" (9.00mm) |
| Contact finish thickness - mating | 39.4µin (1.00µm) |
Frequently asked questions
What is the DF22-3P-7.92DS(05) style?
The listed style is Board to Cable/Wire — a wire-to-board power header with right-angle through-hole termination intended for the cable-side of an industrial interconnect.
Does Hirose provide compliance documentation for this part?
No RoHS, REACH, UL, or IEC certification fields are present in the spec evidence for this listing. The UL94 V-0 flammability rating on the insulator is stated; any additional certifications should be confirmed against the Hirose product drawing before specifying into a regulated application.