Skip to main content
Log in
BNC(75)-PLR-PC-12G-2 — Hirose Electric Co Ltd product photo
Hirose Electric Co Ltd

Hirose BNC(75)-PLR-PC-12G-2 75 Ohm BNC Jack, 12 GHz

MPNBNC(75)-PLR-PC-12G-2
Active

Hirose BNC(75) series 75 Ohm BNC jack, female socket, panel mount through hole right angle, bayonet lock, 12 GHz, 1 port, solder termination, gold plated beryllium copper center contact, nickel body.

$10.3100Ref. price · indicative, final on quote
BNC(75)-PLR-PC-12G-2 datasheet
StockIn Stock (31)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

BNC(75)-PLR-PC-12G-2 Technical Specifications
ParameterValue
MountingPanel Mount, Through Hole, Right Angle
Connector typeJack, Female Socket
Fastening typeBayonet Lock
Frequency - max12 GHz
Mounting featureFlange
Connector styleBNC
Operating temperature-40°C ~ 85°C
Body materialZinc Alloy
Housing colorSilver
Dielectric materialSyndiotactic Polystyrene (SPS)
Center contact materialBeryllium Copper
PackageBulk
Impedance75 Ohms
Body finishNickel
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

75 Ohm BNC Jack, Panel-Mount Right Angle, Rated to 12 GHz

The BNC(75)-PLR-PC-12G-2: The 75 Ohm characteristic impedance is the standard for SDI video, composite video, and RF distribution in broadcast and pro-AV gear; this connector keeps the line at 75 Ohms through the interface, so you don't get a reflection at the panel entry. Rated to 12 GHz, it covers 12G-SDI (UHD-SDI) and lower-rate serial digital video without a frequency roll-off concern.

Mounting and Termination — Panel Flange with Right-Angle Solder Tails

The flange takes the mechanical strain of the cable mate — the bayonet lock on a BNC can transmit a fair bit of torque, and the flange keeps that off the solder joints. The shield termination is solder, so you'll want a soldering iron with enough thermal mass to wet the ground plane on the board.

Frequently asked questions

Where can I buy BNC(75)-PLR-PC-12G-2?

Submit a quote request for current pricing and availability.

Is BNC(75)-PLR-PC-12G-2 suitable for 4K video signals?

Yes. Rated to 12 GHz, it covers 12G-SDI (UHD-SDI at 12 Gbps) and all lower SDI rates used in 4K video transport. The 75 Ohm impedance matches the standard for SDI coaxial cable.