Skip to main content
Log in
Hirose Electric Co Ltd DF36-45P-0.4SD(51) — Panel-Mount & In-Line Circular
Hirose Electric Co Ltd

Hirose DF36-45P-0.4SD(51) Plug, 45 Pos, 0.40mm Pitch

MPNDF36-45P-0.4SD(51)
Active

Hirose DF36 Series Plug, 45 positions, 0.40mm pitch, 1 row, Solder termination, Gold contact finish, Free Hanging, Latch Holder, 42-46 AWG.

$2.5100Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

DF36-45P-0.4SD(51) Technical Specifications
ParameterValue
SeriesDF36
Wire typeDiscrete
TypeOuter Shroud Contact
MountingFree Hanging (In-Line)
Connector typePlug
Fastening typeLatch Holder
Wire gauge42-46 AWG
Cable terminationSolder
ColorNatural
Pitch0.016\" (0.40mm)
PackageTape & Reel (TR) Cut Tape (CT)
Contact finishGold
Rows1
Positions45

Product details

45-Position Micro-Coax Plug for Tight-Pitch Harnesses

The Hirose DF36-45P-0.4SD(51) is a 45-position plug in the DF36 series, built for micro-coax and ultra-fine wire harnesses. The 0.40mm pitch keeps the footprint small, but it means the termination demands steady hands and the right tooling — this is not a general-purpose crimp connector.

Wire Gauge Window — What Fits the Contact

This plug accepts 42-46 AWG discrete wire only. The solder termination means each conductor is soldered directly to the contact.

Position Count vs Siblings — Picking the Right Circuit Count

The DF36 series offers the same 0.40mm pitch and outer shroud contact design across 30, 40, 45, and 50 positions. The DF36-45P-0.4SD(51) sits between the 40-position DF36-40P-0.4SD(51) and the 50-position DF36-50P-0.4SD(51). The decision is purely circuit count — the footprint width scales with position count, so confirm your BOM line before committing. No other spec changes between these three siblings.

Frequently asked questions

What wire gauge does the DF36-45P-0.4SD(51) accept?

This plug accepts 42-46 AWG discrete wire only. The termination is solder-type, not crimp, so the wire must be fine enough to fit the contact cup and the soldering process must be precise at this pitch.

Does the DF36-45P-0.4SD(51) have a cross reference or equivalent?

No official cross-reference or second-source replacement exists. The DF36 series uses a proprietary outer shroud contact geometry and 0.40mm pitch that is Hirose-specific. The closest functional alternative within the series is the 40-position DF36-40P-0.4SD(51) or 50-position DF36-50P-0.4SD(51), but only if your circuit count allows the change.