Skip to main content
Log in
Hirose Electric Co Ltd DF9-9S-1V(69) — Mezzanine & Stacking Connectors
Hirose Electric Co Ltd

Hirose DF9-9S-1V(69) Receptacle, 9 Pos, 1.00 mm Pitch

MPNDF9-9S-1V(69)
Active

Hirose DF9 series receptacle, outer shroud contacts, 9 positions, 2 rows, 0.039" (1.00 mm) pitch, surface mount, gold contacts, 4.3 mm stack height.

$1.2300Ref. price · indicative, final on quote
DF9-9S-1V(69) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

DF9-9S-1V(69) Technical Specifications
ParameterValue
SeriesDF9
MountingSurface Mount
Connector typeReceptacle, Outer Shroud Contacts
Height above board0.130\" (3.30mm)
Mated stacking heights4.3mm
Pitch0.039\" (1.00mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesBoard Guide, Solder Retention
Contact finishGold
Rows2
Positions9
Contact finish thickness8.00µin (0.203µm)

Product details

The Hirose DF9-9S-1V(69) is a 9-position receptacle from the DF9 series, designed for parallel board stacking with a mated stack height of 4.3 mm. Gold-plated contacts (8.00 µin) on the mating interface handle repeated connect-disconnect cycles better than a tin finish would, which matters for a connector that may see field service or calibration swaps.

Position Count and the BOM Line

The 9 positions of the DF9-9S-1V(69) are the first procurement check — the circuit count on your harness or board design must match exactly.

The base product number is DF9-9, and the (69) suffix denotes the gold-plated, tape-and-reel packaged variant.

Mating Half and Assembly Notes

Frequently asked questions

What is the mating connector for DF9-9S-1V(69)?

The DF9-9S-1V(69) receptacle mates with the corresponding DF9 series header (male pin side) to form a board-to-board mezzanine pair at a 4.3 mm stack height. The header part number follows the DF9-9P pattern — confirm the exact header order code against your BOM.