Skip to main content
Log in
Hirose Electric Co Ltd FX8-60P-SV(92) — Mezzanine & Stacking Connectors
Hirose Electric Co Ltd

Hirose FX8-60P-SV(92) FunctionMax™ Header, 60 Pos

MPNFX8-60P-SV(92)
Active

Hirose FunctionMax™ FX8 series, header outer shroud contacts, 60 positions, 0.024" (0.60mm) pitch, 2 rows, surface mount, gold contact finish, 0.112" (2.85mm) height above board.

$3.2100Ref. price · indicative, final on quote
FX8-60P-SV(92) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

FX8-60P-SV(92) Technical Specifications
ParameterValue
SeriesFunctionMax™ FX8
MountingSurface Mount
Connector typeHeader, Outer Shroud Contacts
Height above board0.112\" (2.85mm)
Mated stacking heights3mm
Pitch0.024\" (0.60mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesBoard Guide
Contact finishGold
Rows2
Positions60

Product details

Board-to-Board Header for Tight Stacking

The surface-mount termination suits automated pick-and-place assembly, and the integrated board guide aligns the header during reflow to prevent tombstoning or skew. The 0.112" (2.85mm) height above board, combined with the matching FX8 receptacle, yields a mated stacking height of 3mm — a common dimension for compact handheld or portable equipment where board spacing is constrained.

Mating Pair and Board Layout

This header mates with the Hirose FX8 series receptacle (order code FX8-60S-SV or similar suffix). The 0.60mm pitch demands a tight PCB layout — route traces between pads with a 0.30mm trace/space capability or use micro-vias to break out inner rows.

Frequently asked questions

What is the mated stacking height of FX8-60P-SV(92)?

The FX8-60P-SV(92) header has a height above board of 0.112" (2.85mm). When mated with the matching FX8 receptacle, the total mated stacking height is 3mm.

What is an equivalent or replacement for FX8-60P-SV(92)?

The FX8-60P-SV(91) is a direct functional equivalent — same pitch, positions, stack height, and gold plating — differing only in packaging (Tube vs Tape & Reel). For higher position counts, the FX8-80P-SV(92) and FX8-100P-SV(92) share the same footprint width and stack height.