Hirose GT13SCN-2/1PP-HU — 3-Position Housing for M-Terminal Harnesses
The Hirose GT13SCN-2/1PP-HU is a 3-position housing from the GT13 series, designed to accept M terminals for wire-to-wire or wire-to-board interconnect applications. The housing body is molded in gray polybutylene terephthalate (PBT), a material that provides good dimensional stability and flame resistance typical of connector housings used in industrial and consumer electronics environments.
Position Count and Series Fit
At 3 positions, the GT13SCN-2/1PP-HU sits as the higher-circuit member alongside the 2-position GT13SSN-1/1PP-HU, GT13SHN-1/1PP-HU, and GT13S-1PP-HU housings — all in the same GT13 series, same gray PBT material, same M-style interface, and same M-terminal compatibility. The position count is the sole selection difference: match the housing to the number of circuits your harness requires. If your BOM calls for 2 circuits, any of the 2-position siblings fit; for 3 circuits, this is the housing.
Terminal Compatibility and Harness Assembly
This housing is specified for use with M terminals. When building a harness, confirm that your selected crimp terminal matches the M-series designation — the housing cavity geometry and terminal retention features are designed specifically for that contact family. The gray PBT body provides visual identification on the assembly line, distinguishing it from other color-coded variants in the GT13 series if they exist.