2-Position Housing for Hirose GT13 F-Terminal Harnesses
The Hirose GT13SH-1/1S-HU is a 2-position housing from the GT13 series, designed to accept F terminals. The gray Polybutylene Terephthalate (PBT) body is a standard choice for internal wire-to-board harnesses where the housing sits inside an enclosure — PBT offers good dimensional stability and a UL94 V-0 flame rating for equipment compliance. This is the receptacle side of the interconnect; it mates with the matching header that carries the F terminal contacts.
Terminal Compatibility and Mating Half
This housing is specified for use with F terminals — the crimp contacts that terminate the wire and lock into the housing cavity. The 2-position layout is a single-row configuration; each cavity accepts one F terminal. The mating header is the GT13 series counterpart that carries the same F terminal contacts. For a harness build, you'll need the GT13SH-1/1S-HU housing plus two F terminals and the matching header.