Skip to main content
GT5-1P-DS(70) — Hirose Electric Co Ltd product photo

Hirose GT5-1P-DS(70) Coaxial Receptacle, 50 Ohm, 2 GHz

MPNGT5-1P-DS(70)
Active

Hirose GT5 series coaxial receptacle, 1 port, male pin, right-angle through-hole, 50 Ohm impedance, 2 GHz max frequency, 250 V rating, 30 mating cycles, solder termination.

$2.4500Ref. price · indicative, final on quote
StockIn Stock (26)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

GT5-1P-DS(70) Technical Specifications
ParameterValue
SeriesGT5
MountingThrough Hole, Right Angle
Connector typeReceptacle, Male Pin
Fastening typePush-Pull
Voltage rating250 V
Frequency - max2 GHz
Connector styleCoaxial
Operating temperature-30°C ~ 105°C
Body materialPolybutylene Terephthalate (PBT)
Housing colorGray
Dielectric materialPolybutylene Terephthalate (PBT)
Center contact materialBrass
PackageBulk
FeaturesMounting Flange
Impedance50 Ohms
Mating cycles30
Number of ports1
Contact terminationSolder
Center contact platingTin

Product details

Coaxial Receptacle for Board-Edge RF

The Hirose GT5-1P-DS(70) is a single-port coaxial receptacle from the GT5 series, configured as a receptacle with a male pin contact. The 50 Ohm characteristic impedance and 2 GHz maximum frequency define its usable bandwidth for common RF and microwave signal paths up to low-SHF. The housing is molded from gray polybutylene terephthalate (PBT) and includes a mounting flange for mechanical retention to the board.

RF Performance and Duty Cycle

The 250 V voltage rating is adequate for typical RF signal levels but limits use in high-voltage bias-T or power-over-coax applications.

No official direct equivalent or cross-reference is listed. RoHS compliance is listed on the manufacturer's specification.

Frequently asked questions

What is the mating cycle life of the GT5-1P-DS(70)?

The GT5-1P-DS(70) is rated for 30 mating cycles, which indicates a semi-permanent or test-use duty rather than frequent reconnection.

What is the impedance of the GT5-1P-DS(70)?

The GT5-1P-DS(70) has a 50 Ohm characteristic impedance, matching standard RF system impedance.