Skip to main content
Hirose Electric Co Ltd H.FL-R-SMT(10) — RF Cable Assemblies

Hirose H.FL-R-SMT(10) H.FL Receptacle, 50 Ohm, 3 GHz, SMT

MPNH.FL-R-SMT(10)
Active

Hirose H.FL series, H.FL-R-SMT(10) receptacle, male pin, 1 port, 50 Ohms, 3 GHz max, SMT, snap-on, gold center contact, silver body, -40°C to 90°C.

$1.8300Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

H.FL-R-SMT(10) specifications
ParameterValue
SeriesH.FL
MountingSurface Mount
Connector typeReceptacle, Male Pin
Fastening typeSnap-On
Frequency - max3 GHz
Operating temperature-40°C ~ 90°C
Body materialPhosphor Bronze
Housing colorBlack
Dielectric materialLiquid Crystal Polymer (LCP)
Center contact materialBrass
PackageTape & Reel (TR) Cut Tape (CT)
Impedance50 Ohms
Body finishSilver
Mating cycles50
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

The Hirose H.FL-R-SMT(10) is a surface-mount receptacle from the H.FL series, carrying a male pin center contact. The gold-plated brass center contact and silver-finished phosphor bronze body pair for corrosion resistance across the rated 50 mating cycles.

The 3 GHz limit covers 2.4 GHz ISM bands (Wi-Fi, Bluetooth, Zigbee) and GPS at 1.575 GHz, but it will not pass 5 GHz Wi-Fi or 6 GHz 5G NR bands. If your signal path runs above 3 GHz, step up to the H.FL/S-R-SMT(10) sibling, which is rated for 2 GHz — wait, that is lower. The H.FL-R-SMT(10) is actually the higher-frequency variant in the H.FL family. The 50 mating cycles mean this is a set-and-forget interconnect — fine for a module that mates once during assembly and stays paired for the product life, but not for a frequent-disconnect test port or battery connector.

Frequently asked questions

Where can I buy the H.FL-R-SMT(10) and how is it quoted?

Submit an RFQ for the quantity and packaging (Tape & Reel or Cut Tape) you need.

What is the closest functional alternative to the H.FL-R-SMT(10)?

The H.FL-R-SMT(01) is electrically identical — same 50 Ohm impedance, 3 GHz frequency, and 50 mating cycles — but ships in Bulk packaging instead of Tape & Reel. The H.FL-R-SMT(C)(10) uses a phosphor bronze center contact instead of brass. Neither is a direct replacement; confirm the BOM line for packaging and contact material before switching.