Skip to main content
Log in
Hirose Electric Co Ltd MSS-P-1.5-A(40) — RF / Coaxial Connectors
Hirose Electric Co Ltd

Hirose MSS-P-1.5-A(40) RF Coax Plug, 50 Ohm, 1 GHz, Bulk

MPNMSS-P-1.5-A(40)
Active

Hirose MSS Series RF Coaxial Plug, Male Pin, MSS-P-1.5-A(40), 50 Ohms, 1 GHz, Snap-On, Solder Contact, Bulk.

$14.9300Ref. price · indicative, final on quote
MSS-P-1.5-A(40) datasheet
StockIn Stock (18)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

MSS-P-1.5-A(40) Technical Specifications
ParameterValue
SeriesMSS
MountingFree Hanging (In-Line)
Connector typePlug, Male Pin
Fastening typeSnap-On
Frequency - max1 GHz
Cable group1.5D-2V
Operating temperature-30°C ~ 60°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass
PackageBulk
Impedance50 Ohms
Body finishGold
Mating cycles3000
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

RF Coax Plug for 1.5D-2V Cable

The Hirose MSS-P-1.5-A(40) is a 50 Ohm RF coaxial plug in the MSS series, designed as a male pin connector with a snap-on fastening mechanism. It is specified for use with 1.5D-2V coaxial cable, making it a direct-fit choice for cable assemblies requiring a controlled-impedance signal path up to 1 GHz.

This plug is built for 1.5D-2V cable — a common thin-diameter coax used in short-run RF links. The center contact is soldered, and the shield is terminated via crimp, which gives a repeatable, low-resistance ground connection when the correct crimp die is used. The brass body and gold finish on both the body and center contact provide corrosion resistance and reliable conductivity over the rated 3000 mating cycles.

Frequently asked questions

Where can I buy MSS-P-1.5-A(40) and how do I get a price?

This connector is sourced to order against an RFQ through independent distribution; availability and current pricing are confirmed at quote time. Submit an RFQ for your target quantity to receive a firm quote.

What cable does MSS-P-1.5-A(40) mate with?

It is designed for 1.5D-2V coaxial cable. The center contact is soldered, and the shield is crimp-terminated, so the cable jacket diameter and dielectric must match that cable group for a proper fit.

Is MSS-P-1.5-A(40) obsolete?

No, it is listed as Active on the manufacturer's lifecycle record. There is no EOL notice or last-time-buy date associated with this part.

What is the impedance of MSS-P-1.5-A(40)?

The connector is rated at 50 Ohms nominal impedance, matching the standard for most RF signal paths in telecom, test equipment, and wireless modules.