Skip to main content
Log in
Hirose Electric Co Ltd PL71-P-1.5CW(40) — RF / Coaxial Connectors
Hirose Electric Co Ltd

Hirose PL71-P-1.5CW(40) Coaxial Plug, 75 Ohm, 1 GHz

MPNPL71-P-1.5CW(40)
Active

Hirose PL71 series coaxial plug, PL71-P-1.5CW(40), 75 Ohm, 1 GHz max, snap-on coupling, solder contact termination, crimp shield, for 1.5CQEW.CW cable, gold centre contact, 500 mating cycles.

$13.9835Ref. price · indicative, final on quote
PL71-P-1.5CW(40) datasheet
StockIn Stock (20)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

PL71-P-1.5CW(40) Technical Specifications
ParameterValue
SeriesPL71
MountingFree Hanging (In-Line)
Connector typePlug, Male Pin
Fastening typeSnap-On
Frequency - max1 GHz
Cable group1.5CQEW.CW
Operating temperature-55°C~85°C
Body materialBrass
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass
PackageBulk
Includes2 pcs - 1 Connector, 1 Heat Shrink
Impedance75Ohm
Body finishNickel
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

What this PL71 coax plug is for

The Hirose PL71-P-1.5CW(40) is a 75 Ohm coaxial plug, male pin, designed for the 1.5CQEW.CW cable group. It is a snap-on fastening type — push to mate, pull to release — rated to 1 GHz maximum frequency. The 75 Ohm impedance targets video, CCTV, and broadband signal paths where a 50 Ohm connector would create a mismatch. Gold plating on the centre contact and nickel body finish give it corrosion resistance for field-installed runs. The assembly includes the connector body and a heat shrink tube for strain relief over the cable jacket.

This plug is built specifically for 1.5CQEW.CW cable — the centre conductor solders to the brass pin, and the braid crimps to the nickel-plated brass body. The included heat shrink covers the crimp zone and seals the cable entry. Solder the centre pin, crimp the shield, shrink the tube — that is the full assembly sequence. It is not a universal-fit coax plug; the cable diameter and dielectric match must be correct for the crimp to grip the braid and for the impedance to stay at 75 Ohm through the transition.

Frequently asked questions

Where can I buy the PL71-P-1.5CW(40) with stock?

The PL71-P-1.5CW(40) is sourced to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock-holding claim is made here.

What cable is compatible with PL71-P-1.5CW(40)?

This plug is built for the 1.5CQEW.CW cable group. The centre conductor size and dielectric diameter match the solder pin and crimp ferrule. It is not a generic fit for RG59 or other common coax types — the cable group must match.