Skip to main content
Hirose Electric Co Ltd U.FL-LPHF6-088N2T-A-150 — RF / Coaxial Connectors

Hirose U.FL-LPHF6-088N2T-A-150, U.FL Receptacle, 50 Ohm

MPNU.FL-LPHF6-088N2T-A-150
Active

Hirose U.FL series U.FL-LPHF6-088N2T-A-150 receptacle, male pin, 50 Ohm impedance, 6 GHz max frequency, snap-on fastening, free-hanging right-angle, solder termination.

$5.3300Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

U.FL-LPHF6-088N2T-A-150 specifications
ParameterValue
MountingFree Hanging (In-Line), Right Angle
Connector typeReceptacle, Male Pin
Fastening typeSnap-On
Voltage rating100 V
Frequency - max6 GHz
Operating temperature-40°C~90°C
Body materialPhosphor Bronze
Dielectric materialLiquid Crystal Polymer (LCP)
Center contact materialPhosphor Bronze
PackageBag
Impedance50Ohm
Body finishSilver
Number of ports1
Contact terminationSolder

Product details

RF Interconnect for Tight Spaces

The Hirose U.FL-LPHF6-088N2T-A-150 is a U.FL (UMCC) series receptacle with a male pin center contact, designed for internal RF interconnects where board space is at a premium. The snap-on fastening means it mates quickly with the matching U.FL plug, but the retention is entirely friction-based — there is no threaded collar, so this connector belongs inside an enclosure where the cable won't be tugged.

The 6 GHz max frequency is the upper bound for a 1.3:1 VSWR — above that the insertion loss climbs faster than the datasheet's typical curve. The right-angle, free-hanging orientation means this is not a PCB-mount jack; it terminates a coaxial cable that runs to a board-mounted U.FL header elsewhere in the assembly.

Frequently asked questions

What cable is recommended for U.FL-LPHF6-088N2T-A-150?

The connector is a receptacle with a male pin and solder termination, designed for a specific U.FL-series cable assembly. The mating half is a U.FL plug on a coaxial cable; the exact cable type depends on the impedance and diameter that the plug is crimped to. Confirm the cable assembly part number against the Hirose U.FL series application note.