USB 2.0 Mini-B Receptacle for SMT Board Assembly
This is the receptacle side of the mini-B interface — it mates with a standard mini-B plug.
Board Layout Fit — SMT Right-Angle
The SMT termination suits automated pick-and-place lines; the solder retention feature helps keep the connector aligned through the reflow oven. The 5-contact layout follows the standard mini-B pinout — power (VBUS, GND) and the D+/D- differential pair. The shell is copper alloy, providing the ground return and mechanical shielding for the USB 2.0 signal pair.
The base product number is UX60SA; the full order code includes the (80) suffix, which typically indicates a packaging or revision variant — confirm the BOM line matches this exact suffix.
Comparison with UX60SC-MB-5S8(80)
The UX60SC-MB-5S8(80) is a close sibling in the UX series — same USB 2.0 mini-B receptacle, 5 contacts, gold plating, and SMT right-angle mounting. The key difference is that the UX60SC variant is listed as Shielded, while the UX60SA-MB-5ST(80) has no shielding specification in its record. For designs requiring an EMI-shielded USB port, the UX60SC-MB-5S8(80) is the direct alternative; the UX60SA is the unshielded option. Both carry the same UL94 V-0 housing and active lifecycle status.