The Hirose ZX62MD1-B-5P(01) is listed as Obsolete. This means the manufacturer has formally ended production. If you are planning a new BOM, consider this a last-time-buy or cross-reference exercise.
The Hirose ZX62MD1-B-5P(01) is a USB micro-B receptacle from the ZX series. It is a shielded, 5-contact connector specified for USB 2.0 applications. The gold-plated contacts and stainless steel shell provide corrosion resistance and EMI containment for data and power lines in portable electronics, instrumentation, and consumer devices. The 1.8A per contact rating handles standard USB charging currents, and the 30VAC rating covers the voltage envelope for USB power delivery.
This receptacle supports multiple mounting options: board edge with cutout, surface mount, and through-hole right angle. The mounting feature is described as horizontal, mid mount. This flexibility allows it to be placed at the edge of a PCB for a flush panel interface or mid-board for a right-angle cable exit. Termination is solder-only — no press-fit option. The hybrid footprint (SMT signal pins plus through-hole ground anchors) requires careful pad layout; verify the recommended land pattern from the product drawing before committing the board.
Mating Cycles and Field Reliability
Rated for 10,000 mating cycles, this connector is built for frequent connect/disconnect duty — well above the typical 1,500-5,000 cycles of a standard USB micro-B. The gold contact finish supports this cycle life by resisting wear and fretting corrosion. For field-service equipment, test jigs, or devices that see daily cable swaps, this rating means the connector will outlast the product's service life under normal use.
Operating Environment
The operating temperature range is -30°C to 85°C. This covers indoor consumer electronics, automotive cabin (non-engine bay), and industrial enclosures without active cooling. The shielded design with a steel shell adds mechanical robustness for drop and vibration scenarios typical in handheld devices.