USB micro-AB with a cycle-life edge
The ZX62RD-AB-5P8: Rated for USB 2.0, it carries 5 contacts at 1.8A per contact and 30VAC, with gold-plated contacts and a shielded steel shell. The standout spec is 10000 mating cycles — an order of magnitude beyond a standard USB micro connector, which typically rates 1500-5000 cycles. This makes it a fit for field-serviceable equipment, test fixtures, or any device where the port is used daily over years.
Mounting that needs a second look
The mounting is a hybrid: surface-mount solder pads for the signal contacts, combined with through-hole solder posts for mechanical retention. This is not a standard USB footprint; the through-hole posts take the strain off the SMT joints during cable insertion. The pick-and-place feature and solder retention make it reflow-compatible, but the through-hole posts mean a wave or selective solder step after reflow. Confirm the board keep-out for the reverse-mount body before layout.
10000 cycles — what it buys you
The 10000 mating cycle rating is the defining feature. Standard USB micro connectors wear out at 1500-5000 insertions; the ZX62RD-AB-5P8 is built for the high end of that range. For a device that gets plugged and unplugged multiple times a day over a 5-10 year life, this connector removes the port as a failure point.