Skip to main content
Amphenol F32R-1A7H1-11055

F32R-1A7H1-11055 Amphenol ICC (FCI) Aorora F32R FFC/FPC

MPN F32R-1A7H1-11055
Active

Amphenol ICC (FCI) Aorora F32R series FFC/FPC connector, 55 positions, 0.50 mm pitch, right-angle SMT, ZIF slide lock, gold flash contacts, 0.5 A, 50 V, UL94 V-0.

$1.3000 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesAorora F32R
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

F32R-1A7H1-11055 key specifications
ParameterValue
SeriesAorora F32R
MountingSurface Mount, Right Angle
Cable end typeStraight
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-40°C~105°C
Housing colorNatural
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP), Glass Filled

All specifications

F32R-1A7H1-11055 additional specifications
ParameterValue
Actuator materialPolyamide (PA9T), Nylon 9T, Glass Filled, Halogen Free
Height above board0.079\" (2.00mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles30
Contact finishGold
Locking featureSlide Lock
FFC, FCB thickness0.30mm, 0.33mm
Positions55
Contact finish thickness1.97µin (0.050µm)

Product details

55-Position FPC Connector — 0.50 mm Pitch, ZIF Slide Lock

The F32R-1A7H1-11055: This is a 55-position FFC/FPC connector from the Amphenol ICC (FCI) Aorora F32R series, on a 0.50 mm pitch. The gold flash contact finish (1.97 µinch) and phosphor bronze base support signal-level duty in compact board assemblies.

Cable Fit and Termination — ZIF Slide Lock, 0.30 mm FPC

The actuator slides open to insert the cable, then closes to clamp the contacts — no insertion force on the cable, which avoids pad damage on thin flex circuits. The slide lock also holds the cable under vibration, preventing the back-out that can occur with a simple friction latch. The connector uses bottom contacts, meaning the cable's conductive pads face down toward the PCB. The right-angle orientation routes the cable 90° from the board edge, which is typical for panel-to-board links in display or sensor modules.

Position Count Cross-Reference — 55 vs 54 vs 57

The only difference is position count: 55 positions here, versus 54 positions on the F32R-1A7H1-11054 and 57 positions on the F32R-1A7H1-11057. If your BOM calls for 54 or 57 circuits, those are direct siblings with identical footprint and mating interface — no board layout change beyond the cable width.

MPN
F32R-1A7H1-11055