Skip to main content
Hirose Electric Co Ltd MS-156C

Hirose MS-156C Coaxial Switch Receptacle, 11 GHz, 50 Ohm

MPN MS-156C
Active

Hirose MS-156C series coaxial switch receptacle, female socket, 1 port, 50 Ohm impedance, 11 GHz max frequency, 0.4 dB insertion loss, SMT, gold body finish, snap-on fastening, internal switch, 100 mating cycles.

$0.6500 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

MS-156C key specifications
ParameterValue
SeriesMS-156C
MountingSurface Mount
Connector typeCoaxial Switch - 4mm Plug Dia
Fastening typeSnap-On
Frequency - max11 GHz
Operating temperature-40°C ~ 85°C
Body materialPhosphor Bronze
Housing colorGold
Dielectric materialPolyamide (PA), Nylon 6T
Center contact materialCopper Alloy
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesInternal Switch

All specifications

MS-156C additional specifications
ParameterValue
Impedance50 Ohms
Body finishGold
Mating cycles100
Insertion loss0.4dB
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

RF Switch Receptacle for 4mm Coaxial Plug Interface

The Hirose MS-156C is a surface-mount coaxial switch receptacle from the MS-156C series, designed for applications requiring a normally-closed RF path that opens on plug insertion. The internal switch routes the signal through the receptacle until a 4mm diameter coaxial plug is snapped into place, at which point the internal contacts break the through-path and connect to the plug center pin.

11 GHz Bandwidth with 0.4 dB Insertion Loss

The 11 GHz frequency ceiling with 0.4 dB insertion loss means this connector passes signals through the switch path with minimal attenuation across the entire sub-11 GHz band. The gold-plated phosphor bronze body and gold-plated copper alloy center contact support this RF performance while providing the 100 mating cycles typical for a snap-on coaxial interconnect.

Internal Switch Operation and Mating Detail

The internal switch feature is the defining characteristic of this connector. In its unmated state, the receptacle provides a continuous RF path through the switch contacts. When a 4mm coaxial plug with snap-on fastening is inserted, the internal contacts open and the signal is redirected through the plug. This makes the MS-156C suitable for applications like antenna diversity switching, where the receptacle acts as a normally-closed through-line that can be broken to insert a test probe or alternate signal source. The snap-on fastening provides positive retention without requiring a threaded coupling nut.

Surface-Mount Assembly and Packaging

The MS-156C is a surface-mount component with solder termination on both the shield and center contact.

MPN
MS-156C