Skip to main content
JST 07ZR-8M-P

JST 07ZR-8M-P ZR Series Receptacle, 7 Pos, 1.50 mm Pitch

MPN 07ZR-8M-P
Active

JST ZR Series receptacle, 7 positions, 1.50 mm pitch, 1 row, IDC termination, tin contacts, 28 AWG, free hanging, green housing.

$0.5700 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesZR
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

07ZR-8M-P specifications
ParameterValue
SeriesZR
Wire typeDiscrete
TypeFemale Socket
MountingFree Hanging (In-Line)
Connector typeReceptacle
Wire gauge28 AWG
Cable terminationIDC
ColorGreen
Pitch0.059\" (1.50mm)
PackageBulk
FeaturesClosed End
Contact finishTin
Rows1
Positions7

Product details

The JST 07ZR-8M-P is a 7-position receptacle from the ZR series, terminated via IDC to discrete 28 AWG wire. The green housing is a visual cue on the line; the closed-end feature prevents wire over-insertion during assembly.

This receptacle accepts only 28 AWG discrete wire — no other gauge fits the IDC slot. The IDC termination pierces the insulation on insertion, so no stripping or crimping is needed; a simple hand press or bench tool seats the wire. The closed end acts as a wire stop, so the assembler gets consistent insertion depth without measuring. Free-hanging (in-line) mounting means the connector floats in the harness rather than locking to a panel — typical for internal wiring where the harness routes to a board-mounted header.

The 7 positions at 1.50 mm pitch define the mating header footprint. A 7-circuit header at this pitch is a standard JST ZR series male pin header — the 07ZR-8M-P is the receptacle half. Compared to the 6-position sibling (07ZR-6M-P), the difference is one circuit: the same pitch, same wire gauge, same IDC termination, same tin finish. Choose the 7-position when your BOM calls for seven signal lines; the 6-position covers six. No other specs shift between the two — it is purely a circuit-count decision.

MPN
07ZR-8M-P