Skip to main content
JST LEXR-04V-S

JST LEXR-04V-S Receptacle Housing, 4-Pos, 2.50mm Pitch

MPN LEXR-04V-S
Active

JST LEX series, Receptacle Housing for Socket Contact, LEXR-04V-S, 4 positions, 0.098" (2.50mm) pitch, 1 row, Free Hanging (In-Line), Crimp termination, Natural PA66 housing, 300V, 3A (22 AWG).

$0.2900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

LEXR-04V-S specifications
ParameterValue
SeriesLEX
MountingFree Hanging (In-Line)
Connector typeReceptacle Housing for Socket Contact
Voltage rating300V
Current rating3A (22 AWG)
Operating temperature-55°C ~ 105°C
Housing colorNatural
Housing materialPolyamide (PA66), Nylon 6/6, Glass Filled
Pitch0.098\" (2.50mm)
StyleBoard to Cable/Wire
PackageBulk
TerminationCrimp
Positions4

Product details

The JST LEXR-04V-S is a 4-position receptacle housing from the LEX series, designed as a free-hanging inline connector that accepts socket crimp terminals. It mates with the corresponding LEX series pin header to form a board-to-cable/wire interconnect.

Rated 3 A per circuit when terminated with 22 AWG wire — the current limit is tied directly to the wire size, so stepping down to a thinner gauge drops the ampacity. Voltage ceiling is 300 V, which covers most low-voltage DC rails and signal-level AC circuits inside an enclosure.

This housing takes a socket contact — the mating half is a LEX series pin header (same 0.098" pitch, same position count). Pick the contact plating (tin for cost-sensitive, gold for corrosion resistance or higher mating cycles) based on your environment — the housing doesn't care, but the contact does.

MPN
LEXR-04V-S