Molex KK254, 4094 series unshrouded header, 11 circuits, 0.100" (2.54 mm) pitch, through-hole right-angle, tin-plated square pins, UL94 V-0 nylon housing.
| Parameter | Value |
|---|---|
| Series | KK254, 4094 |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Push-Pull |
| Insulation color | White |
| Insulation height | 0.130\" (3.30mm) |
| Insulation material | Polyamide (PA), Nylon |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Parameter | Value |
|---|---|
| Termination | Solder |
| Applications | Automotive, General Purpose, Medical, Telecommunications |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 11 |
| Contact finish - post | Tin |
| Contact length - post | 0.124\" (3.15mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.369\" (9.37mm) |
| Contact finish thickness - post | 60.0µin (1.52µm) |
| Contact finish thickness - mating | 60.0µin (1.52µm) |
The 0022052111: The right-angle solder tails extend 0.124" (3.15 mm) below the housing — confirm the board thickness and the clearance on the opposite side for solder fillet inspection. On the board, the pin-one position is marked by the square pin geometry and the housing profile — watch this during assembly because an unshrouded header offers no polarization key to prevent a 180° mis-mate.
Sourced through independent distribution channels.
Unshrouded.
0.100" (2.54 mm). This is the standard KK254 pitch and matches the corresponding crimp and IDC receptacle families.
Listed for automotive, general purpose, medical, and telecommunications use. The tin plating and UL94 V-0 housing suit it for controlled indoor environments and moderate-reliability industrial equipment.