Skip to main content
Molex 0528850374

Molex 0528850374 SlimStack Receptacle, 30 Pos, 0.64mm Pitch

MPN 0528850374
Active

Molex SlimStack 52885 series receptacle, center strip contacts, 30 positions, 2 rows, 0.025" (0.64mm) pitch, surface mount, gold 10.0µin plating, 0.165" (4.20mm) height above board, mated stacking heights 6mm to 10mm.

$2.8400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

0528850374 specifications
ParameterValue
SeriesSlimStack 52885
MountingSurface Mount
Connector typeReceptacle, Center Strip Contacts
Height above board0.165\" (4.20mm)
Mated stacking heights6mm, 7mm, 8mm, 9mm, 10mm
Pitch0.025\" (0.64mm)
FeaturesBoard Guide, Solder Retention
PackageTape & Reel (TR) Cut Tape (CT)
ManufacturerMolex
Contact finishGold
Rows2
Positions30
Contact finish thickness10.0µin (0.25µm)

Product details

0.64mm pitch, 30 positions — the tight-pitch mezzanine receptacle for board-stacking designs

Two rows of center strip contacts, gold-plated at 10.0µin, handle moderate mating-cycle duty typical of a one-time assembly or occasional rework in production; the gold grade is not spec'd for high-cycle field-service connectors but is standard for internal mezzanine links in portable electronics, telecom line cards, or rack-mounted modules.

Six stacking heights from one receptacle

What sets this receptacle apart from a fixed-height mezzanine part is the mated stacking height range: 6mm, 7mm, 8mm, 9mm, or 10mm, depending on which mating header you pair it with. That means the same 0528850374 on the board can serve multiple board-spacing designs without requalifying a new connector — useful when a single PCB is used across product variants with different enclosure depths.

Solder retention and board guide — built for reflow assembly

The board guide takes the alignment load off the signal pins during assembly — without it, the fine-pitch contacts could bend or skive on the header's lead-in. Tape & Reel packaging (cut tape available) feeds directly into a pick-and-place line; no hand-loading step needed.

MPN
0528850374