Skip to main content
Samtec Inc. FFSD-05-01-N

Samtec FFSD-05-01-N Tiger Eye™ Receptacle, 10 Pos IDC

MPN FFSD-05-01-N
Active

Samtec Tiger Eye™ FFSD series, FFSD-05-01-N, 10-position dual-row receptacle, 0.050" (1.27mm) pitch, IDC termination for 30 AWG ribbon cable, gold-plated female sockets, free-hanging in-line mount, black housing.

$4.5400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesTiger Eye™ FFSD
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

FFSD-05-01-N specifications
ParameterValue
SeriesTiger Eye™ FFSD
Wire typeRibbon Cable
TypeFemale Socket
MountingFree Hanging (In-Line)
Connector typeReceptacle
Wire gauge30 AWG
Cable terminationIDC
ColorBlack
Pitch0.050\" (1.27mm)
PackageTube
FeaturesFeed Through, Polarizing Key
Row spacing0.050\" (1.27mm)
Contact finishGold
Rows2
Positions10
Contact finish thickness10.0µin (0.25µm)

Product details

The Samtec FFSD-05-01-N is a 10-position, dual-row receptacle from the Tiger Eye™ FFSD series, terminated to 30 AWG ribbon cable via IDC contacts. The 0.050" (1.27mm) pitch and row spacing match the standard 0.050" ribbon cable grid, so this connector lands on a 5x2 contact pattern — the typical layout for a 10-conductor ribbon. It is a free-hanging (in-line) socket that mates with a matching Tiger Eye™ header (same pitch, same row count) to form a board-to-wire interconnect. The black housing carries a feed-through feature, allowing multiple receptacles on the same cable run, and a polarizing key that prevents reversed mating during harness assembly.

The 0.050" (1.27mm) pitch is the tightest common IDC pitch — it sets the board footprint for the mating header and limits the ribbon cable to 30 AWG. The IDC termination to 30 AWG ribbon cable requires no wire stripping, but the cable thickness must be within the IDC slot tolerance, and a mass-termination tool is needed for consistent gas-tight joints. The feed-through feature lets you daisy-chain multiple receptacles on the same cable without a separate jumper — useful for distributing a signal bus across several board locations.

How the 10-Position FFSD-05-01-N Compares to Its Siblings

The FFSD-05-01-N sits at 10 positions in the Tiger Eye™ FFSD family. The 8-position FFSD-04-01 shares the same pitch and termination but lacks the polarizing key feature.

MPN
FFSD-05-01-N