Skip to main content
TE Connectivity AMP Connectors 1-1546074-0

TE Connectivity 1-1546074-0 Buchanan Terminal Block, 10 Pos

MPN 1-1546074-0
Active

TE Connectivity Buchanan series, 10-position terminal block, 0.200" (5.08 mm) pitch, 17.5 A, 300 V, through-hole, 35° wire entry, screw rising cage clamp, black housing, bulk.

$8.3300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-1546074-0 key specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current17.5 A
Wire gauge12-30 AWG
Wire terminationScrew - Rising Cage Clamp
Operating temperature-40°C ~ 105°C
ColorBlack
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingBrass - Nickel Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated

All specifications

1-1546074-0 additional specifications
ParameterValue
Pitch0.200\" (5.08mm)
PackageBulk
FeaturesInterlocking (Side)
Screw threadM3
Torque - screw0.79 Nm (7.0 Lb-In)
Number of levels1
Mating orientation35° (145°) Angle with Board
Positions per level10

Product details

10-Position Angled-Entry Terminal Block for Tight Enclosures

What the 35° Wire Entry Means for Your Enclosure Fit

The 35° (145°) mating orientation is the key differentiator from the vertical-entry sibling 1-1546073-0, which shares the same 10-position count, 5.08 mm pitch, 17.5 A rating, and M3 screw torque. The angled entry routes wires flat against the PCB, reducing the height above the board by roughly the wire bend radius — a real advantage when the enclosure lid clearance is under 20 mm. The vertical-entry version (1-1546073-0) is better when wires drop straight down into a wiring duct below the board.

Screw Torque and Wire Termination — Field Reliability

The rising cage clamp termination accepts 12-30 AWG wire and uses an M3 brass screw with a specified torque of 0.79 Nm (7.0 Lb-In). The clamp material is brass with nickel plating, and the contact surface is brass with tin plating — the tin-on-brass interface is standard for screw-terminal connections where the connection is made by the clamp force, not by the plating metallurgy. The interlocking (side) feature lets you snap multiple 1-1546074-0 blocks together side-by-side to build a larger terminal strip without needing a separate end barrier or jumper system.

MPN
1-1546074-0