Skip to main content
TE Connectivity AMP Connectors 1-1746741-8

TE RITS 1-1746741-8 Socket, 8P IDC, 2.00mm Pitch

MPN 1-1746741-8
Active

TE Connectivity RITS series, 1-1746741-8, 8-position female socket, 2.00mm pitch, single row, IDC termination, gold-plated contacts, free-hanging, 20-26 AWG discrete wire, black housing, tube packaging.

$6.4000 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesRITS
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-1746741-8 specifications
ParameterValue
SeriesRITS
Wire typeDiscrete
TypeFemale Socket
MountingFree Hanging (In-Line)
Connector typeSocket
Wire gauge20-26 AWG
Cable terminationIDC
ColorBlack
Pitch0.079\" (2.00mm)
PackageTube
Contact finishGold
Rows1
Positions8
Contact finish thickness8.00µin (0.203µm)

Product details

2.00 mm IDC Socket for Discrete Wire Harnessing

The TE Connectivity RITS 1-1746741-8 is an 8-position female socket built for discrete wire IDC termination. Termination is IDC — insulation displacement — so you push the wire into the slot rather than crimp a separate contact. That speeds up assembly for 20-26 AWG discrete wire, but the trade-off is limited rework: once the wire is seated, pulling it damages the slot. The socket accepts a range of wire gauges within that span, which gives some flexibility on the harness side. Contact finish is gold at 8.00 µinch thickness. It is not specced for high-vibration or corrosive duty, but for a typical wire-to-board interconnect inside an enclosure it holds up fine. The housing is black, and the part ships in a tube. Base product number is 1746741.

Mating and Compatibility — 2.00 mm Header Fit

This socket mates with a standard 2.00 mm pitch male pin header — the kind used widely in TE and other connector families at that pitch. The 8 positions line up one-to-one with an 8-pin header; there is no depopulation or spare circuit to manage. The single-row arrangement means the header must also be single-row. No fastening type is listed on this socket — it relies on the friction fit of the IDC contacts against the header pins. If your application sees vibration, consider a header with a locking ramp or a secondary retention feature. The RITS series does not include an integral latch on this variant.

MPN
1-1746741-8