Skip to main content
TE Connectivity AMP Connectors 1-216093-4

TE AMP-Latch 1-216093-4, 14-Pos DIP IDC Header

MPN 1-216093-4
Active

TE Connectivity AMP-Latch series, DIP IDC header, 14 positions, 2 rows, 0.100" (2.54mm) board pitch, 0.050" (1.27mm) cable pitch, through-hole, tin contacts, vertical orientation.

$3.6900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesAMP-Latch
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-216093-4 specifications
ParameterValue
SeriesAMP-Latch
MountingThrough Hole
Connector typeRibbon Cable, DIP Header
Wire gauge28 AWG, Stranded; 26-30 AWG, Solid
Cable pitch0.050\" (1.27mm)
Cable terminationIDC
ColorGray
PackageBulk
FeaturesFeed Through
Row spacing0.100\" (2.54mm)
Contact finishTin
Rows2
Board-Side pitch0.100\" (2.54mm)
Positions14
Contact finish thickness118.1µin (3.00µm)

Product details

14-Position AMP-Latch DIP Header for Ribbon Cable

The 1-216093-4: It's a vertical, through-hole connector with two rows, all positions loaded, and uses an IDC (Insulation Displacement Contact) termination — the cable is pressed onto the fork contacts, no stripping or crimping required. This is the workhorse part for connecting a 14-conductor ribbon cable to a DIP socket or through-hole pattern on a PCB. The dual-pitch transition — 0.050" on the cable side to 0.100" on the board side — is the defining feature of the AMP-Latch family, letting a dense ribbon cable fan out to a standard IC footprint. The wire gauge range is 26-30 AWG solid or 28 AWG stranded, covering the common ribbon cable sizes for logic-level signals and parallel data buses.

What the Key Specs Mean for Your Fit

The 14 positions match a 14-conductor ribbon cable one-to-one — no unused pins, no daisy-chaining. The 0.100" board-side pitch matches the standard DIP IC footprint, so this header fits into a 14-pin DIP socket or a plated through-hole pattern on 0.100" centers. The 0.050" cable pitch is the standard for 28-30 AWG gray ribbon cable; the IDC termination is a one-step assembly process — the cable is laid into the slot and pressed down with a hand tool or press, which drives the fork contacts through the insulation to make contact with the conductor. The thick tin plating (118.1 µin) is suitable for environments with few mating cycles — think internal wiring in test equipment, industrial controllers, or legacy bus interfaces — but not for frequent disconnect/reconnect duty where gold would be specified.

MPN
1-216093-4