Skip to main content
TE Connectivity AMP Connectors 1-2301994-0

TE Connectivity 1-2301994-0 RJ45 Jack, 1 Port, 1000 Base-T

MPN 1-2301994-0
Active

TE Connectivity 1-2301994-0 RJ45 jack, 1 port, 8 cores, 90° right-angle, through-hole, shielded with EMI finger, gold-plated contacts, board lock, -40°C to 85°C.

$11.4600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-2301994-0 key specifications
ParameterValue
MountingThrough Hole
Connector typeRJ45
Operating temperature-40°C ~ 85°C
LED colorGreen - Yellow
Shield materialBrass
Contact materialCopper Alloy
Housing materialLiquid Crystal Polymer (LCP)
Height above board0.537\" (13.65mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesBoard Lock
ShieldingShielded, EMI Finger
Orientation90° Angle (Right)

All specifications

1-2301994-0 additional specifications
ParameterValue
TerminationSolder
Applications10/100/1000 Base-T, AutoMDIX
Tab directionDown
Contact finishGold
Rows1
Number of ports1
Contact finish thickness30.0µin (0.76µm)
Number of cores per jack8

Product details

Gigabit Ethernet Jack for Board-Edge Termination

The TE Connectivity 1-2301994-0 is a single-port RJ45 jack rated for 10/100/1000 Base-T and AutoMDIX — it handles the full Gigabit Ethernet signal path, not just basic 10/100 traffic. The 8-position, 1-row layout matches standard Ethernet cabling pinouts (T568A/B). Shielding is a brass shell with an integrated EMI finger. Gold-plated contacts (30.0 µin) on a copper-alloy base. LCP holds dimensional stability through reflow and resists the flux and wash chemicals used in board assembly.

What the Shielding and LED Tell You About Fit

The EMI finger on this jack is a spring contact that bears against the panel cutout, creating a bond between the connector shield and chassis ground. The green-yellow bicolor LED is integrated into the jack body. Typical wiring: green for link, yellow for activity. The LED pins are separate from the signal cores — they need their own current-limiting resistors on the board, and the forward voltage of the LED determines the resistor value. No integrated magnetics in this part — the PHY-side magnetics (transformer, common-mode choke) are on the board, not inside the connector. Tab direction is down, meaning the RJ45 plug's latch faces the PCB when mated. That orientation is standard for most PCB-mounted jacks — the latch is accessible from the top of the enclosure, and the cable strain relief pulls against the board lock, not the solder joints.

MPN
1-2301994-0