Skip to main content
TE Connectivity AMP Connectors 1-796949-2

TE Connectivity Buchanan 1-796949-2

MPN 1-796949-2
Active

TE Connectivity Buchanan, 12-position PCB terminal block, 5.08mm pitch, 17.5 A, 300 V, through-hole, screw rising cage clamp, black housing.

$8.2100 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-796949-2 key specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current17.5 A
Wire gauge12-30 AWG
Wire terminationScrew - Rising Cage Clamp
ColorBlack
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingBrass - Nickel Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated
Pitch0.200\" (5.08mm)

All specifications

1-796949-2 additional specifications
ParameterValue
PackageBulk
FeaturesInterlocking (Side)
Screw threadM3
Torque - screw0.79 Nm (7.0 Lb-In)
Number of levels1
Mating orientationHorizontal with Board
Positions per level12

Product details

12-Position PCB Terminal Block with 5.08 mm Pitch

The TE Connectivity Buchanan 1-796949-2 is a 12-position, single-level PCB terminal block from the Buchanan series. It uses a screw - rising cage clamp wire termination, accepting 12-30 AWG wire, and is rated for 17.5 A at 300 V. The mating orientation is horizontal with the board, meaning the wire entry is parallel to the PCB surface — a common arrangement for terminal blocks on the edge of a control board where wires dress out sideways. The black polyamide (PA66) housing carries an interlocking side feature, allowing multiple blocks to be ganged together into a longer strip without extra hardware.

Wire Termination and Torque Specs for the Build

The rising cage clamp mechanism pulls the wire up against a nickel-plated brass clamp plate as the M3 screw is tightened. The recommended torque is 0.79 Nm (7.0 Lb-In) — exceeding this can strip the threads in the PA66 housing or deform the clamp. The clamp and screw are both brass with nickel plating, providing corrosion resistance in industrial cabinet environments. Contact material is brass with tin plating, which is standard for screw-clamp terminal blocks where the connection is maintained by clamping force rather than repeated mating cycles. The 12-30 AWG range covers most panel wiring from heavy power feeds (12 AWG) down to signal-level control wiring (30 AWG).

MPN
1-796949-2