Skip to main content
TE Connectivity AMP Connectors 1658537-3

TE AMPLIMITE HDP-20 1658537-3, Stamped Socket Contact

MPN 1658537-3
Active

TE Connectivity AMPLIMITE HDP-20 series, stamped socket contact, 1658537-3, crimp termination, 20-24 AWG, gold plating 30.0µin (0.76µm), phosphor bronze.

$0.2100 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1658537-3 specifications
ParameterValue
TypeStamped
SeriesAMPLIMITE HDP-20
Wire gauge20-24 AWG
Contact materialPhosphor Bronze
PackageTape & Reel (TR) Cut Tape (CT)
Pin or socketSocket
Contact finishGold
Contact terminationCrimp
Contact finish thickness30.0µin (0.76µm)

Product details

Stamped socket contact for AMPLIMITE HDP-20 D-sub housings

This is the female (socket) half of the crimp-contact pair, designed to be terminated to 20-24 AWG wire and inserted into the appropriate HDP-20 housing.

The contact uses a crimp termination — no soldering required — which means the wire is mechanically captured and the termination is repeatable with the correct crimp tool. The 20-24 AWG range covers the typical signal and low-current power wires used in D-sub applications: 24 AWG for multi-conductor signal cables, 20 AWG for higher-current circuits or longer cable runs. The stamped contact body is phosphor bronze, a spring-grade alloy that holds its shape under the crimp barrel compression and maintains contact force against the mating pin over temperature cycles.

Gold plating thickness and mating cycle life

The 30.0µin (0.76µm) gold finish on the contact area is a heavy plating grade for a stamped contact — standard commercial D-sub contacts often use flash gold (10-15 µinch) or selective plating. The gold is over the phosphor bronze base metal; no nickel underplate is specified in the listing, but the gold thickness alone indicates the contact is intended for reliable signal-level interconnects rather than high-current power duty.

MPN
1658537-3