Skip to main content
TE Connectivity AMP Connectors 2106053-2

TE 2106053-2 SlimSeal Header, 2-Pos, 3.50mm, IP67

MPN 2106053-2
Active

TE Connectivity SlimSeal series, Header, Male Pins, 2 positions, 0.138" (3.50mm) pitch, Surface Mount, Solder termination, Tin contacts, IP67, Latch Lock.

$3.0307 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2106053-2 key specifications
ParameterValue
SeriesSlimSeal
MountingSurface Mount
Connector typeHeader, Male Pins
Fastening typeLatch Lock
Voltage rating400V
Current rating3.5A (22-24AWG); 5A (18-20 AWG)
IP ratingIP67 - Dust Tight, Waterproof
Operating temperature-40°C ~ 105°C
Housing colorBlack
Contact materialBrass
Housing materialLiquid Crystal Polymer (LCP)
Pitch0.138\" (3.50mm)

All specifications

2106053-2 additional specifications
ParameterValue
StyleBoard to Cable/Wire
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention
TerminationSolder
Mating cycles30
Contact finishTin
Positions2

Product details

Sealed SMT Header for Tight Spaces

It uses a 0.138" (3.50mm) pitch, which keeps the footprint small while still allowing enough creepage for the 400V rating.

The current rating depends on the wire gauge you crimp into the mating receptacle: 3.5A for 22-24 AWG, and 5A for 18-20 AWG. That's not a derating curve — it's a straight wire-size limit, because the terminal's contact resistance drops with thicker wire. For a 2-position connector, this is typically a single power pair (V+ and return), so the full 5A per circuit is available if you use 18 AWG. The 30 mating cycles tell you this is a semi-permanent install — it's not built for frequent disconnect cycles, but it will survive field service if you're careful.

IP67 and the Sealed Mating Interface

The IP67 rating — dust-tight and waterproof to 1m immersion — applies when this header is mated with the corresponding SlimSeal female receptacle and the latch lock is engaged. The seal is at the mating face, not the board, so the PCB side still needs conformal coating if the board itself sees moisture. The tin contact finish is fine for the 30-cycle life and the sealed environment; gold would be overkill here.

MPN
2106053-2