Skip to main content
TE Connectivity AMP Connectors 5558382-1

TE 5558382-1 Modular Jack, 8P8C R/A Shielded, Cat3

MPN 5558382-1
Active

TE Connectivity 5558382-1 modular jack, 8P8C (RJ45, Ethernet), right-angle through-hole, shielded with EMI finger, board lock and keyed, Cat3 rated, gold 50.0µin plating, -40°C to 85°C, tray.

$4.8600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5558382-1 specifications
ParameterValue
MountingThrough Hole
Connector typeJack
Operating temperature-40°C ~ 85°C
LED colorDoes Not Contain LED
Contact materialPhosphor Bronze
Housing materialPolybutylene Terephthalate (PBT), Polyester
PackageTray
RatingsCat3
FeaturesBoard Lock, Keyed, Panel Stops
ShieldingShielded, EMI Finger
Orientation90° Angle (Right)
TerminationSolder
Tab directionDown
Contact finishGold
Rows1
Number of ports1
Contact finish thickness50.0µin (1.27µm)
Number of positions (Contacts)8p8c (RJ45, Ethernet)

Product details

The 5558382-1: The housing carries a board lock and panel stops, plus a keying feature that prevents inserting a non-keyed plug. An EMI finger on the shield bleeds common-mode noise to the chassis ground before it reaches the signal pairs — useful in industrial panels where variable-frequency drives or switching supplies share the cabinet.

The Cat3 rating limits this jack to 10BASE-T and voice applications — the internal wiring and crosstalk margin are specced for 16 MHz signaling, not the 100 MHz of Cat5e or the 250 MHz of Cat6. For a 10 Mb control network or a POTS line in a backplane, the 50.0µin gold and the shielded housing give you a solid, noise-bleeding interconnect that will outlast the equipment.

Through-hole solder termination with the board lock holding the part in place during wave or selective solder — the lock anchors the shield ground and keeps the right-angle body from lifting under cable strain. The keying tab and panel stops register the jack in the cutout so the EMI finger contacts the panel edge consistently. Single-row, single-port layout; the tab faces down when the jack is mounted on the top side of the board.

MPN
5558382-1