Skip to main content
TE Connectivity AMP Connectors 6123001-3

TE 6123001-3 Free Height Plug, 80 Pos, 0.80mm Pitch

MPN 6123001-3
Active

TE Connectivity Free Height (FH) series, Plug Center Strip Contacts, 80 positions, 0.80mm pitch, 2 rows, Surface Mount, Gold 30.0µin, 8mm mated stack height, Tape & Reel.

$5.7000 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesFree Height (FH)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

6123001-3 specifications
ParameterValue
SeriesFree Height (FH)
MountingSurface Mount
Connector typePlug, Center Strip Contacts
Height above board0.309\" (7.85mm)
Mated stacking heights8mm
Pitch0.031\" (0.80mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesBoard Guide
Contact finishGold
Rows2
Positions80
Contact finish thickness30.0µin (0.76µm)

Product details

Board-to-Board Mezzanine Plug, 80 Positions, 0.80mm Pitch

It uses a 0.031" (0.80mm) pitch dual-row contact layout with center strip contacts, and terminates via surface mount for reflow assembly. The mated stack height is 8mm, set by the 0.309" (7.85mm) height above board. A built-in board guide aids alignment during board stacking, protecting the fine-pitch contacts from shear damage.

The 8mm mated stack height is the vertical clearance between the two parallel PCBs when this plug is mated with its matching receptacle. At 0.80mm pitch, the routing density is high — two signal traces can typically pass between pads on a standard PCB layer. The board guide on the plug body helps the assembler align the boards before the contacts engage, which matters at this pitch where a misalignment of a few tenths of a millimeter can bend contacts.

For a single-mate permanent stack, the gold is over-specified but adds no downside.

The 1-120532-2 is a different pitch (1.00mm) and position count (84), so it is not a functional equivalent for a 0.80mm footprint.

MPN
6123001-3