Skip to main content
TE Connectivity AMP Connectors 8-1734774-0

TE 8-1734774-0 PCIe Connector, 64 Pos, 1.00mm, Gold

MPN 8-1734774-0
Active

TE Connectivity PCI Express female connector, 8-1734774-0, 64 positions, 2 rows, 0.039" (1.00mm) pitch, through hole, solder staggered termination, gold contact finish 145.7µin, black PA46 housing, board guide and locking ramp.

$0.9700 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

8-1734774-0 specifications
ParameterValue
Card typePCI Express™
TypeCantilever
MountingThrough Hole
ColorBlack
Contact materialPhosphor Bronze - Tin Plated
Material - insulationPolyamide (PA46), Nylon 4/6
Pitch0.039\" (1.00mm)
GenderFemale
PackageTray
FeaturesBoard Guide, Locking Ramp
Read outDual
TerminationSolder, Staggered
Card thickness0.062\" (1.57mm)
Contact finishGold
Rows2
Positions64
Contact finish thickness145.7µin (3.70µm)

Product details

The TE Connectivity 8-1734774-0 is a 64-position PCI Express female card-edge connector on a 1.00mm pitch, dual-row layout, designed to accept a standard PCIe add-in card. It is the slot-side connector — the one soldered into the motherboard — that mates with the gold fingers on a graphics, storage, or network card. The 64 positions match the electrical lane count of a PCIe x16 slot, making this the common choice for desktop and server mainboards where a full-bandwidth x16 interface is needed. The housing is molded from black PA46 (Nylon 4/6) rated for reflow soldering, and includes both a board guide and a locking ramp to align the card during insertion and hold it against vibration.

The 1.00 mm pitch requires the motherboard layout engineer to verify trace escape routing between the through-hole pads.

Termination is through-hole solder with staggered rows — the two rows of pins are offset to allow easier routing between them on the motherboard. The connector does not use press-fit; it is designed for wave or selective soldering. The board guide and locking ramp are molded into the insulator, so no separate alignment hardware is needed. The card thickness accepted is 0.062" (1.57 mm), the standard PCIe card thickness.

MPN
8-1734774-0